1
to get started in a career as an automotive ______________ you should have a mechanical aptitude and complete automotive training
2
this produces voltage between 13.5 & 15 volts
3
you need this before using any equipment
4
some new cars have as many as 15 of these
5
these should be reported to the instructor immediately
6
oily rags should always be stored in a _______________ container
7
this type of motor is powered by air
8
must be demonstrated by the instructor before using
9
attach an exhaust hose to this when running a car inside the shop
10
when jump starting a vehicle, the last connection to be made is the _____________
11
position of a creeper should be stored in when not being used
12
how all drawers and cabinets should be kept
13
you should use this when turning a nut or bolt
14
tools put here will cause injury, tear clothing, and damage upholstery
15
always use safety stands when using this kind of jack
16
these should be returned to the tool box, tool room or its proper location
17
when disconnecting anything electrical in a vehicle, you should always disconnect the ground from this
18
always disconnect the negative _________________ when you have to disconnect the battery from the vehicle
19
the position of the jack handles so they will not be tripped over
20
metric unit of volume
21
there are this many rings on a piston
22
ground conditions when using a jack
23
metric unit of weight
24
means 1000 in the metric system
25
You need 2 years of work experience and pass a written test to be ____________________________ certified
26
respirators, safety glasses, and steel-toed shoes are all examples of this
