Removal and checking of cards from the mouth of the One2Six machine (从 One26 机器口取出和检查其余的扑克卡片)
Take approximately 1½ deck and load into the One2Six machine (4 to 6 times) (New Cards Loading) (取约 1 个 1⁄2 的扑克卡片并装载到 One2Six 机器（4 到 6 次）)
Upon confirmation (PS & CR), removal of all cards from the One2Six to card vault (PS和CR确认后，将扑克卡从 One2Six 取出转移到扑克卡库)
Placed the remaining deck of cards below 10 burn face down cards on the layout (将剩余的扑克卡片和 10 张刻录面朝下卡片放在布局上)
Placed the deck of cards in the middle of the layout (将整副扑克卡片放在布局中间)
Burn Face-Up Card & collect them upon PS confirmation (刻录面部卡片 – 在 PS 确认时收起)
Upon finish loading and the green light appears (加载完成后， One2Six 机器绿灯出现)
Both PS and CR fill in respective information before sealing it by the PS (PS 和CR 在 PS 密封之前都填写相应的信息)
Take approximately 1½ deck and load into the One2Six machine (4 to 6 times) Removal Card Process (取约 1 个 1⁄2 的扑克卡片并装载到 One2Six 机器（4 到 6 次）)
Check issued Card Vault for intentionally/unintentional damage before opening it (在打开卡库之前检查已颁发的卡库是否受到故意/无意损坏)
Upon finish loading and the red light appears at One2Six machine (missing 10 cards at display) (加载完成后，One2Six 机器将出现红灯（显示屏上缺少 10 张牌）)
Open Card vault, fill in the details (打开卡库保管库，填写详细信息)
Open One2Six machine and takeout the cards from One2Six machine (PS job function) (从 One26 机器拆卸和移除扑克卡片（PS 作业功能）)
