Quiz: HSE Quiz


HSE QuizOnline version HSE rules and site safety basics. by Joneth Henry 1 What is the first step in a near-miss reporting procedure in ADNOC sites? a Report to supervisor and log the event b Notify only peers c Ignore unless injury occurs d Document privately in the team chat 2 Which PPE is mandatory for all personnel entering a live crude oil area? a Cotton shirt and jeans b Non-flame-resistant suit c Gloves only d Flame-resistant coveralls and helmet 3 Which action minimizes hydrocarbon ignition risk during hot work? a Use a dust mask only b Ignore atmospheric testing c Obtain a hot-work permit and use FFC d Work without permit if late 4 What is the primary purpose of LOTO procedures? a Tag workers' belongings b Lock out and tag out to isolate energy sources c Hide the energy sources d Lock only the door 5 Which measurement indicates acceptable atmospheric hydrocarbon levels? a Any level if visible fumes b Only during night shifts c Within regulatory exposure limits d Only during audits 6 What should you do if you discover a damaged safety valve? a Ignore if not leaking b Continue work cautiously c Repair it yourself without permission d Immediately report and isolate the area 7 Which plan governs all on-site emergency responses? a No formal plan is required b Site Emergency Response Plan (ERP) c Local fire code only d Personal emergency plan 8 Which tool is essential for ladder safety in oil & gas sites? a Portable chair as support b Ladderless access c One-handed climbing d Three-point contact and stabilised ladder 9 What must be done before lifting heavy loads with cranes? a Only visual check b Rigging checks and crane handover permit c Skip if load is small d Assume it's safe if staff are present 10 Which is a key element of contractor management in ADNOC HSSE? a Pre-qualification and safety induction b Only financial review c Induction after work starts d No checks required 11 What is the best practice for control of work on process facilities? a One-person approval only b Skip risk assessment if busy c Informal authorization d Permit-to-work system and risk assessment 12 Which action protects against heat stress in hot environments? a Drink only when thirsty b Stay hydrated and take scheduled breaks c Wear heavy clothing always d Work nonstop to finish soon 13 Which is a primary objective of process safety management (PSM)? a Reduce inspection frequency b Ignore minor incidents c Prevent major fires, explosions, and toxic releases d Increase production speed 14 What should be done if a confined space entry is required? a Enter quickly to save time b Follow permit, gas testing, and standby rescue c Skip gas testing if crowded d Have no trained standby 15 What is the role of incident investigation in HSE? a Identify root causes and prevent recurrence b Only log for records c Ignore if minor d Assign blame to individuals 16 Which document outlines safe operating procedures (SOPs)? a SOP manuals for each task b No formal documents c Employee handbooks only d Marketing briefs 17 What should be done with waste hydrocarbon-soaked materials? a Disposed with ordinary trash b Burned on site c Left for next shift d Stored and disposed through approved processes 18 Which environment factor requires continuous monitoring during operations? a Office humidity only b Gas leaks and flammable atmospheres c Ambient music level d Lunch-break light levels 19 What is the purpose of near-miss reporting in ADNOC rules? a Compile for audits only b Learn and prevent future incidents c Delay other work d Criticize colleagues 20 Which action is essential during a fire emergency in a plant? a Stand by to observe b Ignore if small flames c Attempt to fight fire alone d Shout alarm and evacuate to muster point Feedback 1 Reporting to a supervisor ensures proper investigation and learning from the incident. 2 Flame-resistant PPE protects against ignition sources in hydrocarbon environments. 3 Hot-work permits and flame- and hydrocarbon-control (FFC) are required for ignition risk control. 4 LOTO ensures equipment cannot be energised during maintenance. 5 Work is allowed when atmospheric tests meet defined exposure limits. 6 Immediate reporting prevents potential releases and injuries. 7 ERP provides structured actions for various emergencies. 8 Maintaining three-point contact reduces fall risk. 9 Rigging and permit ensure safe crane operations and load control. 10 Pre-qualification and induction align contractor safety standards with site rules. 11 Formal permits and risk assessments prevent unsafe activities. 12 Hydration and breaks mitigate heat-related illnesses. 13 PSM focuses on preventing catastrophic events, not just compliance. 14 Confined space work requires rigorous controls and monitoring. 15 Root-cause analysis guides corrective actions to prevent repeats. 16 SOPs provide step-by-step safe methods for tasks. 17 Hazardous waste requires controlled collection and disposal. 18 Monitoring ensures early detection of hazardous atmospheres. 19 Near-miss data helps improve safety without injuries. 20 Immediate alarm and evacuation ensure personnel safety.

1

What is the first step in a near-miss reporting procedure in ADNOC sites?

a

Report to supervisor and log the event

b

Notify only peers

c

Ignore unless injury occurs

d

Document privately in the team chat

2

Which PPE is mandatory for all personnel entering a live crude oil area?

a

Cotton shirt and jeans

b

Non-flame-resistant suit

c

Gloves only

d

Flame-resistant coveralls and helmet

3

Which action minimizes hydrocarbon ignition risk during hot work?

a

Use a dust mask only

b

Ignore atmospheric testing

c

Obtain a hot-work permit and use FFC

d

Work without permit if late

4

What is the primary purpose of LOTO procedures?

a

Tag workers' belongings

b

Lock out and tag out to isolate energy sources

c

Hide the energy sources

d

Lock only the door

5

Which measurement indicates acceptable atmospheric hydrocarbon levels?

a

Any level if visible fumes

b

Only during night shifts

c

Within regulatory exposure limits

d

Only during audits

6

What should you do if you discover a damaged safety valve?

a

Ignore if not leaking

b

Continue work cautiously

c

Repair it yourself without permission

d

Immediately report and isolate the area

7

Which plan governs all on-site emergency responses?

a

No formal plan is required

b

Site Emergency Response Plan (ERP)

c

Local fire code only

d

Personal emergency plan

8

Which tool is essential for ladder safety in oil & gas sites?

a

Portable chair as support

b

Ladderless access

c

One-handed climbing

d

Three-point contact and stabilised ladder

9

What must be done before lifting heavy loads with cranes?

a

Only visual check

b

Rigging checks and crane handover permit

c

Skip if load is small

d

Assume it's safe if staff are present

10

Which is a key element of contractor management in ADNOC HSSE?

a

Pre-qualification and safety induction

b

Only financial review

c

Induction after work starts

d

No checks required

11

What is the best practice for control of work on process facilities?

a

One-person approval only

b

Skip risk assessment if busy

c

Informal authorization

d

Permit-to-work system and risk assessment

12

Which action protects against heat stress in hot environments?

a

Drink only when thirsty

b

Stay hydrated and take scheduled breaks

c

Wear heavy clothing always

d

Work nonstop to finish soon

13

Which is a primary objective of process safety management (PSM)?

a

Reduce inspection frequency

b

Ignore minor incidents

c

Prevent major fires, explosions, and toxic releases

d

Increase production speed

14

What should be done if a confined space entry is required?

a

Enter quickly to save time

b

Follow permit, gas testing, and standby rescue

c

Skip gas testing if crowded

d

Have no trained standby

15

What is the role of incident investigation in HSE?

a

Identify root causes and prevent recurrence

b

Only log for records

c

Ignore if minor

d

Assign blame to individuals

16

Which document outlines safe operating procedures (SOPs)?

a

SOP manuals for each task

b

No formal documents

c

Employee handbooks only

d

Marketing briefs

17

What should be done with waste hydrocarbon-soaked materials?

a

Disposed with ordinary trash

b

Burned on site

c

Left for next shift

d

Stored and disposed through approved processes

18

Which environment factor requires continuous monitoring during operations?

a

Office humidity only

b

Gas leaks and flammable atmospheres

c

Ambient music level

d

Lunch-break light levels

19

What is the purpose of near-miss reporting in ADNOC rules?

a

Compile for audits only

b

Learn and prevent future incidents

c

Delay other work

d

Criticize colleagues

20

Which action is essential during a fire emergency in a plant?

a

Stand by to observe

b

Ignore if small flames

c

Attempt to fight fire alone

d

Shout alarm and evacuate to muster point

Feedback

1

Reporting to a supervisor ensures proper investigation and learning from the incident.

2

Flame-resistant PPE protects against ignition sources in hydrocarbon environments.

3

Hot-work permits and flame- and hydrocarbon-control (FFC) are required for ignition risk control.

4

LOTO ensures equipment cannot be energised during maintenance.

5

Work is allowed when atmospheric tests meet defined exposure limits.

6

Immediate reporting prevents potential releases and injuries.

7

ERP provides structured actions for various emergencies.

8

Maintaining three-point contact reduces fall risk.

9

Rigging and permit ensure safe crane operations and load control.

10

Pre-qualification and induction align contractor safety standards with site rules.

11

Formal permits and risk assessments prevent unsafe activities.

12

Hydration and breaks mitigate heat-related illnesses.

13

PSM focuses on preventing catastrophic events, not just compliance.

14

Confined space work requires rigorous controls and monitoring.

15

Root-cause analysis guides corrective actions to prevent repeats.

16

SOPs provide step-by-step safe methods for tasks.

17

Hazardous waste requires controlled collection and disposal.

18

Monitoring ensures early detection of hazardous atmospheres.

19

Near-miss data helps improve safety without injuries.

20

Immediate alarm and evacuation ensure personnel safety.

You can integrate the game into an LMS compatible with LTI 1.1 or LTI 1.3 such as Canvas, Moodle, or Blackboard. This way, the scores will be automatically saved into the platform’s gradebook.

HSE Quiz

Quiz

About this activity

Created by

Download the paper version to play

Top Games

Quiz

Tissues - Practice Quiz

Quiz

Spanish Alphabet Listening

Quiz

UPS 5 Seeing Habits Quiz

Quiz

Photosynthesis vs Cellular Respiration - Practice Quiz

Quiz

Practice Quiz - Punnett Square, Variation, and Mutations

HSE QuizOnline version

by Joneth Henry

What is the first step in a near-miss reporting procedure in ADNOC sites?

Which PPE is mandatory for all personnel entering a live crude oil area?

Which action minimizes hydrocarbon ignition risk during hot work?

What is the primary purpose of LOTO procedures?

Which measurement indicates acceptable atmospheric hydrocarbon levels?

What should you do if you discover a damaged safety valve?

Which plan governs all on-site emergency responses?

Which tool is essential for ladder safety in oil & gas sites?

What must be done before lifting heavy loads with cranes?

Which is a key element of contractor management in ADNOC HSSE?

What is the best practice for control of work on process facilities?

Which action protects against heat stress in hot environments?

Which is a primary objective of process safety management (PSM)?

What should be done if a confined space entry is required?

What is the role of incident investigation in HSE?

Which document outlines safe operating procedures (SOPs)?

What should be done with waste hydrocarbon-soaked materials?

Which environment factor requires continuous monitoring during operations?

What is the purpose of near-miss reporting in ADNOC rules?

Which action is essential during a fire emergency in a plant?

Feedback

		%
	Anonymous	%
		%
		%